Hello again, my name is Rodney Reynolds and welcome to another video review. Today I will be looking at the Hiper Anubis Case.

This mid tower case is made from 100% high grade 6063 T5 aluminum using patented welded technology which means it’s fairly heavy but extremely strong. As a matter of fact, it can withstand weights up to 100 kilograms or 220 pounds.

At the top is an included 120 millimeter exhaust fan, two USB ports, microphone jack, headphone jack, line in, power LED, hard drive activity LED, reset button and power button.

At the front there's a door that has lots of ventilation and diamond laser cut trimming. The door opens from left to right and it’s held to the place by magnetic force. When the door is open it reveals one 3 ½ inch drive bay and six 5 ¼ inch drive base.

The left and right side panels have extremely loaded easy open latch system. There are two latches at the top of each side panel. To remove the side panel, just push down on each one of these latches and pull off and the side panel is very easily removed.

The left side panel it comes with a large metal grill and plastic window. This gives the user the option of having a grill for added ventilation or a window. At the back is where a standard ATX power supply and motherboard IOSU plate gets installed. Surprisingly, they do not include a fan at the back but a 80 millimeter, 90 millimeter or 120 millimeter fan can be installed and I would strongly recommend installing a 120 millimeter fan to ensure positive airflow through the case.

Here are the seven expansions slots and two holes for an external water cooling system tubes to pass through. This case fit ATX, micro ATX; flex ATX and ITX from factor motherboards. Since it is a mid-tower case, there is not a lot of room where come to inside and unfortunately the motherboard tray is not removable.

Four hard drives can be installed in the removable hard drive cage and each 3 ½ inch drive base have rubber to prevent vibrations. The other 5 ¼ inch drive base also has this rubber. Also an optional 120 millimeter fan can be installed on the removable hard drive cage.

Thumb screws are used on the drive base and expansion slots so installation of drives in the drive base is a tool list operation so with installation of cards in the expansion slots. At the bottom are four rubber feet that have excellent anti-vibration properties and it won't scratch the surface. Finally have a listen to the stock cooling.

If you're in the market for a very, very solid all aluminum mid-sized tower case, I would strongly recommend you to check this product though. It has lots of great features but it doesn’t come with a removable motherboard tray.

Overall though, this is a kick ass product. Until the next time take care.