Male Speaker: Fan removal. To begin, grab your flathead and your Philips head screwdriver. And you'll want to screws located here. One, underneath tape and wires are here. Remove the tape with your flathead screwdriver. And you'll notice three ribbon connectors located on the logic board, go ahead and remove these as well.

Once step out connector, which is help us screw here. Remove that of the logic board and another sliding connector, which is located here. To remove that, remove those out of the way.

Once the wires where out of the way, go ahead and remove the other screws located in the heat skinning fan. Also there is four connectors holding the fan in place. These are snap on connectors go ahead and gently remove these with the flathead or Philip head screwdriver, gently lift up and they should snap out of place. Once those were out, lift up and out to remove the fan.