How to Crochet Baby Booty High Tops Part 14/29

Okay so the next part here is that we're now going to create the—see how we have a line in this boot here. We need to create that line as we’re now going to be starting to work on the sides and so from this point to this point is actually all one area of your project. So the front still the tongue is cut at front part covered as now where there's going to work on back and forth all the way up and down. Now what is really important with this one and this is where I screwed up in the past is that we need to create this line and you can either start like this create that line like that or you can do it the side and what I found is that, if the tongue is not on the right hand side because I’m right handed it cause if not to look properly and what I did is I did two boots that are supposed to be identical sides and because one time I went this way and started and then the other time I went to other way it cause it to be a different size so its kind of like man or without—so what we want to do is we want to grab your material again and what we're going to be doing is that we're going to be working on the back loops only. And the back loops are actually going to be closes to me in this case. So it’s actually going to be closest to me so I create that line because if you got this back loop here you’ll never see it, you’ll never see that line because it will just vary it.

So we want to create this. So what we're going to do is we're going to start our first one. Okay so basically this stitch here is part of the tongue so you’re just going to grab the next stitch over, put your material on and pull it through and what we're going to do is that we're going to wrap it like that because that’s your first one done. So what we want to do is that we want to only grab the loop that is closest to you and you must all put your straggler right into the actual piece because in this case you’ll see it. So just grab. So to see the two loops here you just want the one that is closest to you only. And what we're going to do is single stitch all the way around as part of the directions and keep that struggler and check there. This part of the video is actually really simple. Okay so keep going on the loops that are closes to you and I probably can see it. See how that line is now being created, that’s what exactly what you’re looking for so stay the loop closest to you. For me to starting this project was about an hour and a half to do one boot but I’ve been managing to get it just over an hour and that’s because I understand the pattern and of course this tutorial will always take a longer because I’m talking my steps out and not just diving in and getting it done.

Okay, so I find this sole a little hard to do and just were like this stitching but it’s not undoable like everything is possible right. So that I find it’s not too bad and the one I find is a pain in the ass is the actual side of the boot. So what we're going to do is we're connect and continue to go around until we get to the stitch just before the tongue starts back up and this is part of the pattern called side of the shoe and this is row number one. Okay so obviously the pattern picks up on the next stitch so this is the last one and then the last you’re going to chain up one. Okay so that’s your first one all the way around and again don’t worry about the stragglers we can fix it after.